Rossmax Pulse Oximeter SB200

Rossmax  Fingertip  Pulse  Oximeter  SB200  is  used  to  measure  arterial  oxygen  saturation  (%  SpO2)  of  hemoglobin  and  pulse  rate,  an  important  indicator  of  your  respiratory  function.  It  is  non-invasive  device  intended  for  spot-check  of  adult  and  pediatric whose age is over 3 at home, hospital and clinics.

Features:

• Artery Check Technology (ACT) embedded : ACT (Artery Check Technology) analysis the pulse and SpO2 signals and determines the actually prevailing stiffness of the artery (Artery Condition). ACT further comprehensively classifies the arterial condition into 6 levels and presents the result by an intuitive graphical visualisation. Pulse rate, SpO2 and the artery condition are available at your fingertip!
  
• Instant readings of SpO2, pulse rate and artery condition in 1 minute
• Shielded Design blocks Ambient Light
• Biocompatibility & Anti-Allergic Design
• Pulse Strength Indicator
• Visible & audible alarm
• Two way, two color OLED display
• Cord attached

Directions for Use:

1. Open the clip; press the Power On/Off button.
2. Information of software version appears. Insert one finger(left hand  middle  finger  is  recommended),  nail  side  up,  into  the  finger opening of the pulse oximeter.
3. The display shows  , pulse oximeter begins its measurement. (Note: Make sure the finger is lying flat. Do not shake and keep body steady during measurement.)
4. Your   SpO2  and  pulse  rate  values  will  appear  on  the  screen  after  few  seconds  and  artery  check  result  will  appear  on  screen after 30 - 60 seconds.
5. Remove  the  finger,  the  screen  will  show  artery  check  level.
6. Press button shortly to switch the display to the 3 parameters (artery check, SpO2 and pulse rate).